Straight Type Conduit Fitting (For Abrasion Resistance Type)
The Straight Type Conduit Fitting (For Abrasion Resistance Type) - AZ60 series are applied on the relay or end point of wiring system to connect metal conduits and junction box/enclosure to extend and protect the system. The body is made of zinc alloy with RoHS compliance. The fitting is fixed to the junction box or tapped entries by locknut with G male thread system and connected with metal flexible conduit by a nut. The compact structure of this fitting offers feature of high tensile resistance. It can either be fitted with EMC screening conduit series PAG13SB, PAG13TB & PAS13SB.
Feature
-
Material:
Zinc Alloy -
Temperature Range:
-20℃~+90℃ -
IP Rating:
IP 40 (Fit with Abrasion Resistance Type braided conduit) -
Surface Finish :
Zinc plated, other treatments are available by consult. -
RoHS Compliance :
Yes -
Certificate :
CE
Parameter
G Thread
| Nominal Conduit Size | Nominal Conduit Size | G Thread | Part Number | Package/Box (Pcs) | Weight/Box (Kg) | Certificate | Mated With |
|---|---|---|---|---|---|---|---|
| 16 | 3/8 | 1/2" | G1/2-AZ60-3/8 | 500 | 20.5 | 
| 
|
| 20 | 1/2 | 1/2" | G1/2-AZ60-1/2 | 500 | 24 |
|
|
| 25 | 3/4 | 3/4" | G3/4-AZ60-3/4 | 300 | 24.8 |
|
|
| 32 | 1 | 1" | G1-AZ60-1 | 160 | 18.2 |
|
|
| 40 | 1-1/4 | 1-1/4" | G1-1/4-AZ60-1-1/4 | 100 | 19.8 |
|
|
| 50 | 1-1/2 | 1-1/2" | G1-1/2-AZ60-1-1/2 | 60 | 15.5 |
|
|
| 63 | 2 | 2" | G2-AZ60-2 | 50 | 20.1 |
|
|
M Thread
| Nominal Conduit Size | Nominal Conduit Size | M Thread | Part Number | Package/Box (Pcs) | Weight/Box (Kg) | Certificate | Mated With |
|---|---|---|---|---|---|---|---|
| 16 | 3/8 | M16x1.5 | M16-AZ60-16 | 500 | 20.5 |
|
|
| 20 | 1/2 | M20x1.5 | M20-AZ60-20 | 500 | 24 |
|
|
| 25 | 3/4 | M25x1.5 | M25-AZ60-25 | 300 | 24.8 |
|
|
| 32 | 1 | M32x1.5 | M32-AZ60-32 | 160 | 18.2 |
|
|
| 40 | 1-1/4 | M40x1.5 | M40-AZ60-40 | 100 | 19.8 |
|
|
| 50 | 1-1/2 | M50x1.5 | M50-AZ60-50 | 60 | 15.5 |
|
|
| 63 | 2 | M63x1.5 | M63-AZ60-63 | 50 | 20.1 |
|
|
Related Products
Document
Looking for high-fit metal or non-metal conduits and fittings?
